Miniature Optical Rail With Sliding
With various components:Crystal Mount,
Poroprism Mount, Top and Adjustable Mount
SIZE- 300mm x75mm x 12 mm
|
|
SIZE- 4’’ X 6"
Minimum Height – 2"
MAXIMUM Height- 6"
6" X 12 "
75mm X 175mm
|
|
With X-Y Movement Z By Thumb Screw
Range – 0-25 mm
|
| 4 Miniature Optical Rail Miniature Optical Rail are
stable mounting and positioning are required to build optical systems. In the laboratory,
posts and post holders are the most com- monly used methods of mounting optical component
holders. These methods permit a significant amount of vertical and angu- lar adjustment
for coarse alignment, without sacrificing rigidity. Post clamps offer added mounting
flexibility with right-angle or adjustable-angle post combinations. Pillars provide stable
structures for mounting optical components. They can be positioned anywhere on an optical
table and securely held in place with a clamping fork. A pillar mounting platform can then
be added to the top of a pillar, or several pillars can be stacked together.
Twenty-millimeter-diameter posts can be used if taller pillars are required. Slotted
mounting bases are available for mounting and positioning component holders, post holders,
and positioning stages. |
|
4 Lab Jack These utilizes a dual pantograph
design.Strong, excellent quality support jack is constructed of aluminum and stainless
steel. The adjustment mechanism uses a lead screw to close the angle between the opposing
pairs of supporting struts. The top plate has an array of 35 M6 tapped mounting holes on
50mm centers. These utilizes a dual-pantograph design which offers excellent rigidity. The
adjustment mechanism uses a lead screw to close the angle between the opposing pairs of
supporting struts. The Mini experimental offers the same highly rigid dual-pantograph
design but in a smaller package size. The adjustment mechanism provides smooth vertical
motion while supporting vertical loads of up to 50lbs. The top and bottom plates each
offer a generous supply of tapped holes and counter bores, adding to mounting flexibility.
Height adjustment is made with the hex wrench included with this, or with a 1/8 in. ball
driver. This is an economy jack which allows for coarse adjustment of height only. There
is unfortunately nothing we can do about this. Therefore, we are selling the jack assuming
that there is no crank handle included, just the white knob. If you need one with the
crank handle, please contact us before ordering. |
|
4 XY With Magnetic Base All models can be equipped
with a magnetic base to make them perfectly stable on curved and compatible metallic
surfaces.A magnetic base can be used to position a component securely anywhere on a
magnetic optical table or breadboard, and it allows the component to be moved without the
use of tools. The base platform of the Micro We manufacture different types of Magnetic
Base, each of which has been designed to meet the particular requirements of various
professions. They are easy to transport and to regulate (they can be held in one hand),
they work at low tension and are perfect to be used directly in production. The
"VCR" series of video microscopes is characterised by a high video-optical and
mechanical quality; their compactness and practicality make them unique in all kinds of
different uses. All VCRs contain a source of powerful annular or coaxial light, which
makes these appliances completely autonomous, without need of bulky and expensive external
lighting equipment. |
