4 Pin Hole Mounts
Pin holes are an important part of any laser system. They must be accurately
positioned in both X and Y directions.pinhole camera must originate entered a in All
photographs , equipped with a Lenox Laser precision pinhole.Pinhole Photography gives a
wonderful range of hints and tips on using and making pinhole cameras. The edges ofthe
pinhole mounts are threaded 8-32 or M4 for attachment to a standard mounting post or
pedestal.The simple version uses a plain bearing and fine pitched push screws. It is
suitable for most general purpose applications. The precision version utilizes an X-Y ball
bearing stage with precision micrometer drives. Both mounts will accept any pinhole which
is mounted on a 16mm diameter disc. The disc is held in place by a retainer ring. Standard
to high precision drive versions A wide selection of mounted pinholes offered Suitable for
post mounting . At Camera Mounts we are dedicated to manufacturing the finest quality
camera mounting systems. Our design team has feature film camera mounting experience and
we have spent many years developing the most innovative and versatile camera mounting
systems specifically designed the serious cinematographers. All of our camera mounts are
based on an ingenious modular system. This modular system allows you to transform our kits
into a wide variety of interior and exterior mounts. Our kits come complete with tools,
helpful hints, and instructions for quick and easy assembly. Our customer support staff is
second to none, and we will do our best to point you in the right direction for all of
your camera mounting needs. |
4 Kinematic Mirror Mount
The kinematic mirror mount is made of black anodized aluminum.This kinematic
mirror mount provides smooth adjustment over an angular range of 85degrees.Kinematic
mirror mounts designed to hold 3 sizes of mirrors. Comes complete with metric post. 4
Metric Sizes Available • Metric Post Included • Precision Micrometer Movement for Tilt
Adjustment • Color Coded Knobs for Pitch and Roll • Set Screw Holds Optics in Place
• Pads for Optics Precision stainless steel, 0.35-mm-pitch (73-TPI) adjustment
screws yield an angular resolution of 15 arc sec- onds. 12.5 to 12.7 mm (0.5 inch) and 25
to 25.4 mm (1-inch) glasses are attached to the component holders. This provide economical
precision mounting of mirrors.The product line includes adapters for mounting additional
diameter optical metarial, prisms and cube beamsplitters. Materials: Top mounted
micrometers do not interfere with system integration. Dimension D2 represents the clear
aperture. Metric Post Holders are needed for mounting to a breadboard. Black anodized
aluminum. Materials: Plastic knobs Brass bushings Chromed ball bearings Anodized aluminum
body Stainless steel set screws 3 point support Rolling ball tips Compact design Fingertip
adjustments Pre-assembled base plate Can be mounted on post, table or rail Super fine
threads in screw assembly Compatible with micrometers with 3/8" shafts Tilting plate
- plain faced*/or with one of the following pattern: One M4-threaded hole and two
M2-threaded holes are provided in the base for mounting to either a post or a base. When
mounting to a base, riser blocks can be used to raise the fixed optical axis height. A
center-of-rotation base plate can be used to position the surface on the rotational axis
of a post or base. When mounted horizontally on top of a post, this mount becomes a prism
or cube-beamsplitter tilt table. |
